HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (5414 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PP-MF10 LUPOL GP3102
Manufacturer:
No Characteristics
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KPT1010 PP-MF10
Manufacturer:
No Characteristics
Physical Properties
Density
0.96
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-C/2S PP-MEF(x)
Manufacturer:
Wittenburg B.V.
EMI Attenuation/Shielding, Copolymer
Physical Properties
Density
0.98
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
EMI Attenuation/Shielding, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-MEF(x) 52/5-07A
Manufacturer:
EMI Attenuation/Shielding, Homopolymer
Physical Properties
Density
0.97
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
EMI Attenuation/Shielding, Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A3 T40 PRTA011 PH209 PP-MD40
Manufacturer:
Petrotene
Injection Molding, Other Extrusion
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-MD40 ISOFIL® H 40 C2 X
Manufacturer:
No Characteristics
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ FARADEX™ Compound MS003
Manufacturer:
Electrically Conductive, EMI/RFI shielding
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, EMI/RFI shielding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CP20 MF20 NL XC30 PP-MD20
Manufacturer:
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A3 T40 NTLA010 PH320 PP-MD30
Manufacturer:
Petrotene
Injection Molding, Other Extrusion
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-H A 4818/100 MR18 PP-MD18
Manufacturer:
ALTECH
Special Features detergent solution stabilised
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Special Features detergent solution stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP 4040 LE 15085 WT1132-15
Manufacturer:
highly reflective,opaque,low emission
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
highly reflective,opaque,low emission
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-MD20 POLIFOR® 15 T20 H-R
Manufacturer:
Heat and copper contact stabilized
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat and copper contact stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-B B 4430/500 MR30
Manufacturer:
Copolymer
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-B A 4430/100 MR30 PP-(MD+MX)30
Manufacturer:
heat stabilised
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
199 X 143686 A BLACK
Manufacturer:
Contains renewable resources, Recycled Resin Content
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources, Recycled Resin Content
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP MD 20-1
Manufacturer:
R&P Polyplastic
No Characteristics
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-B B 4020/506 MR20 PP-MD20
Manufacturer:
Copolymer
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A3 T10 NTLA010 PH374 MSP PP-MD10
Manufacturer:
Petrotene
Homopolymer
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
199 X 143684
Manufacturer:
No Characteristics
Physical Properties
Density
0.97
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
199 X 143684 C
Manufacturer:
No Characteristics
Physical Properties
Density
0.97
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 5414 materials | Scroll down for more