HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (8647 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
V0150B
Manufacturer:
Good low temperature impact resistance, damp heat performance, low moisture absorption, good dimensional stability
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good low temperature impact resistance, damp heat performance, low moisture absorption, good dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NORYL™ Resin V0150B - Europe
Manufacturer:
good low temperature impact resistance, damp heat performance, low moisture absorption, good dimensional stability
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good low temperature impact resistance, damp heat performance, low moisture absorption, good dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
V0150B
Manufacturer:
NORYL™
Non-reinforced blend, good low temperature impact resistance, damp heat performance, low moisture absorption, good dimensional stability
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-reinforced blend, good low temperature impact resistance, damp heat performance, low moisture absorption, good dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
V0150B
Manufacturer:
NORYL™
good low temperature impact resistance, damp heat performance, low moisture absorption, good dimensional stability
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good low temperature impact resistance, damp heat performance, low moisture absorption, good dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
V0150B
Manufacturer:
NORYL™
good low temperature impact resistance, damp heat performance, low moisture absorption, good dimensional stability
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good low temperature impact resistance, damp heat performance, low moisture absorption, good dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NORYL™ Resin PX9406P
Manufacturer:
Strong electrical performance, high heat resistance, Low Warpage, low moisture absorption, and dimensional stability
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Strong electrical performance, high heat resistance, Low Warpage, low moisture absorption, and dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SE1X
Manufacturer:
non-reinforced blend, non-brominated, non-chlorinated flame retardant, strong electrical performance, low moisture absorption, dimensional stability, hydrolytic stability
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend, non-brominated, non-chlorinated flame retardant, strong electrical performance, low moisture absorption, dimensional stability, hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SE1X
Manufacturer:
non-reinforced blend, non-brominated, non-chlorinated flame retardant, strong electrical performance, low moisture absorption, dimensional stability, hydrolytic stability
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend, non-brominated, non-chlorinated flame retardant, strong electrical performance, low moisture absorption, dimensional stability, hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX9406P
Manufacturer:
Non-brominated, non-chlorinated flame retardant, VDE certified IEC60335, strong electrical performance, high heat resistance, Low Warpage, low moisture absorption, dimensional stability
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-brominated, non-chlorinated flame retardant, VDE certified IEC60335, strong electrical performance, high heat resistance, Low Warpage, low moisture absorption, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX9406P
Manufacturer:
Non-brominated, non-chlorinated flame retardant, VDE certified IEC60335, strong electrical performance, high heat resistance, Low Warpage, low moisture absorption, dimensional stability
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-brominated, non-chlorinated flame retardant, VDE certified IEC60335, strong electrical performance, high heat resistance, Low Warpage, low moisture absorption, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX0888
Manufacturer:
NORYL™
Non-reinforced blend, very low moisture absorption, hydrolytic stability, dimensional stability, good foam adhesion, property retention over a wide temperature range
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-reinforced blend, very low moisture absorption, hydrolytic stability, dimensional stability, good foam adhesion, property retention over a wide temperature range
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX0888
Manufacturer:
NORYL™
very low moisture absorption, hydrolytic stability, dimensional stabilty, good foam adhesion, property retention over a wide temperature range
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very low moisture absorption, hydrolytic stability, dimensional stabilty, good foam adhesion, property retention over a wide temperature range
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX0888
Manufacturer:
NORYL™
Non-reinforced blend, low moisture absorption, hydrolytic stability, dimensional stability, good foam adhesion, property retention over a wide temperature range
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-reinforced blend, low moisture absorption, hydrolytic stability, dimensional stability, good foam adhesion, property retention over a wide temperature range
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX0888
Manufacturer:
low moisture absorption, hydrolytic stability, dimensional stabilty, good foam adhesion, property retention over a wide temperature range
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low moisture absorption, hydrolytic stability, dimensional stabilty, good foam adhesion, property retention over a wide temperature range
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX0844
Manufacturer:
very low moisture absorption, hydrolytic stability, dimensional stabilty, good foam adhesion, property retention over a wide temperature range
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very low moisture absorption, hydrolytic stability, dimensional stabilty, good foam adhesion, property retention over a wide temperature range
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPO534
Manufacturer:
NORYL™
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PVX0901
Manufacturer:
NORYL™
High flow, injection moldable, non-brominated, non-chlorinated flame retardant, good dimensional stability, low moisture absorption, low specific gravity
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High flow, injection moldable, non-brominated, non-chlorinated flame retardant, good dimensional stability, low moisture absorption, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PVX1201
Manufacturer:
NORYL™
Low moisture absorption, creep resistance, dimensional stability, and hydrolytic stability
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low moisture absorption, creep resistance, dimensional stability, and hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PVX0901
Manufacturer:
NORYL™
High flow, injection moldable, non-brominated, non-chlorinated flame retardant, good dimensional stability, low moisture absorption, low specific gravity
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High flow, injection moldable, non-brominated, non-chlorinated flame retardant, good dimensional stability, low moisture absorption, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPO534
Manufacturer:
NORYL™
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Total 8647 materials | Scroll down for more