HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (8647 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
731S
Manufacturer:
NORYL™
good surface appearance, high ductility, low moisture absorption, dimensional and hydrolytic stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good surface appearance, high ductility, low moisture absorption, dimensional and hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
731S
Manufacturer:
NORYL™
good surface appearance, high ductility, low moisture absorption, dimensional and hydrolytic stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good surface appearance, high ductility, low moisture absorption, dimensional and hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
7310
Manufacturer:
NORYL™
good surface appearance, high ductility, good impact resistance, low moisture absorption, creep resistance, dimensional stability, hydrolytic stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good surface appearance, high ductility, good impact resistance, low moisture absorption, creep resistance, dimensional stability, hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
731
Manufacturer:
NORYL™
Good surface appearance, high ductility, good impact resistance, low moisture absorption, creep resistance, dimensional stability, and hydrolytic stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good surface appearance, high ductility, good impact resistance, low moisture absorption, creep resistance, dimensional stability, and hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CN1134
Manufacturer:
NORYL™
good dimensional stability, low moisture absorption, high rigidity
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good dimensional stability, low moisture absorption, high rigidity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CN5260
Manufacturer:
NORYL™
high modulus, injection moldable, non-brominated, non-chlorinated flame retardant, good dimensional stability, low moisture absorption, high rigidity
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high modulus, injection moldable, non-brominated, non-chlorinated flame retardant, good dimensional stability, low moisture absorption, high rigidity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CN5258
Manufacturer:
NORYL™
high modulus, injection moldable, good dimensional stability, low moisture absorption, high rigidity
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high modulus, injection moldable, good dimensional stability, low moisture absorption, high rigidity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CN5246
Manufacturer:
NORYL™
Good dimensional stability, low moisture absorption, high rigidity
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good dimensional stability, low moisture absorption, high rigidity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CN1134
Manufacturer:
NORYL™
Good dimensional stability, low moisture absorption, high rigidity
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good dimensional stability, low moisture absorption, high rigidity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CN5260
Manufacturer:
NORYL™
Good dimensional stability, low moisture absorption, high rigidity
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good dimensional stability, low moisture absorption, high rigidity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HS2000X
Manufacturer:
electrical performance, dimensional stability, very low moisture absorption, hydrolytic stability
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
electrical performance, dimensional stability, very low moisture absorption, hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HS2000X
Manufacturer:
electrical performance, dimensional stability, very low moisture absorption, hydrolytic stability
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
electrical performance, dimensional stability, very low moisture absorption, hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NHP6011
Manufacturer:
high impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption, very low specific gravity
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption, very low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FE1740PW
Manufacturer:
Long-term hydrolytic stability, very low moisture absorption, heat/hot water resistance
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Long-term hydrolytic stability, very low moisture absorption, heat/hot water resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NORYL™ Resin NHP6011
Manufacturer:
high impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption, very low specific gravity
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption, very low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FE1740PW
Manufacturer:
Long-term hydrolytic stability, very low moisture absorption, heat/hot water resistance
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Long-term hydrolytic stability, very low moisture absorption, heat/hot water resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SE1GFN3
Manufacturer:
NORYL™
High heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
GFN3F
Manufacturer:
Low moisture absorption, high strength, hydrolytic stability, low warpage, low specific gravity, dimensional stability
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low moisture absorption, high strength, hydrolytic stability, low warpage, low specific gravity, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WM230A Asia
Manufacturer:
Excellent long term hydrolytic stability, very low water absorption, heat / hot water resistance
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent long term hydrolytic stability, very low water absorption, heat / hot water resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WM230A
Manufacturer:
Excellent long term hydrolytic stability, very low water absorption, heat / hot water resistance
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent long term hydrolytic stability, very low water absorption, heat / hot water resistance
Recorded properties are for screening; verify source data and conditions.
Total 8647 materials | Scroll down for more