HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (25727 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA66_Vydyne® 49H BK03
Manufacturer:
Ascend
impact-modified, high modulus
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact-modified, high modulus
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66_Vydyne® 66A NT0766
Manufacturer:
Ascend
High strength, rigidity and toughness
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High strength, rigidity and toughness
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66_Vydyne® 65A NT0751
Manufacturer:
Ascend
medium-viscosity, heat-stabilized
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
medium-viscosity, heat-stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66_Vydyne® 49H NT0745
Manufacturer:
impact-modified, high modulus
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact-modified, high modulus
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66_Vydyne® 50BW
Manufacturer:
Ascend
General Purpose
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General Purpose
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66_Vydyne® 47H NT0688
Manufacturer:
Ascend
High impact or impact modified, Heat stabilized or stable
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66_Vydyne® 23HST BK0891
Manufacturer:
Ascend
unfilled, heat-stabilized, lubricated injection-molding
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
unfilled, heat-stabilized, lubricated injection-molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66_Vydyne® 22HSPCN BK0815
Manufacturer:
Ascend
unfilled, lubricated, heat stabilized
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
unfilled, lubricated, heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 Vampamid 66 0024 V0
Manufacturer:
Flame retardant, Halogen-free, Phosphorus-free
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free, Phosphorus-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 Vampamid 66 0023 V0 H GW
Manufacturer:
Flame retardant
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 Y 00U 06 V0 26 SC2 ST
Manufacturer:
Increased electrical conductivity, Anti-static, Flame retardant
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Anti-static, Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66_Tislamid® B UNR K05 R01
Manufacturer:
No Characteristics
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 Tislamid® B UNR K043 R01
Manufacturer:
No Characteristics
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 Tislamid® B UNR K042 R01
Manufacturer:
No Characteristics
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 TEREZ® PA 6.6 7750 T H SF
Manufacturer:
Dry impact modified Polyamide 6.6 with good flowability, good demoldability and heat stabilizer
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Dry impact modified Polyamide 6.6 with good flowability, good demoldability and heat stabilizer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 TEREZ® PA 6.6 7600 H
Manufacturer:
Medium viscosity, good flowability and heat stabilisation. For long moulding parts, short cycletime, good demoulding.
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medium viscosity, good flowability and heat stabilisation. For long moulding parts, short cycletime, good demoulding.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 TEREZ® PA 6.6 7610 H
Manufacturer:
Heat stabilized
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 TEREZ® PA 6.6 7750 TC
Manufacturer:
good flowability and demoulding properties, high impact resistance
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good flowability and demoulding properties, high impact resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 TEREZ® PA 6.6 7600
Manufacturer:
Unfilled
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Unfilled
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 TEREZ® PA 6.6 7750 T H
Manufacturer:
Dry impact modified Polyamide 6.6 with good flowability, good demoldability and heat stabilizer. For all kind of moulding parts with increased demand of Impact resistance.
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Dry impact modified Polyamide 6.6 with good flowability, good demoldability and heat stabilizer. For all kind of moulding parts with increased demand of Impact resistance.
Recorded properties are for screening; verify source data and conditions.
Total 25727 materials | Scroll down for more