HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (47468 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA6-GF15 FR(17) Novamid® 1010GN2-15 NAT
Manufacturer:
Injection Molding, High Flow
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, High Flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF15_NG15-01ABK
Manufacturer:
No Characteristics
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF15_NEVIMID 6 B G15
Manufacturer:
No Characteristics
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF15_NEVIFLAM PA6 160 G15
Manufacturer:
Flame retardant
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF15_NEVIMID 6 B G15L
Manufacturer:
Nevicolor S.p.A.
Europe
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Europe
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF15_Matrixx FP63E15BK22
Manufacturer:
Injection Molding
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF15 HS1 UV2 BK0302 03021
Manufacturer:
No Characteristics
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF15 HS1 IM2 BK0302 03052
Manufacturer:
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF15 HS1 NC0303 03028
Manufacturer:
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF15 HS1 BK0302 03012
Manufacturer:
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF15_KOPA® KN133G15ST
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF15 FRIANYL® B3 GF15 V2 NC 1102TA
Manufacturer:
No Characteristics
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF15 FORMPOLY® SN6GF15ST BLACK
Manufacturer:
Excellent mechanical and thermal properties with reduced shrinkage
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent mechanical and thermal properties with reduced shrinkage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF15 FORMPOLY® SN6GF15ST BLACK
Manufacturer:
Excellent mechanical and thermal properties with reduced shrinkage
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent mechanical and thermal properties with reduced shrinkage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF15 EPLAMID 6 GX0 15 RP BK Q1D0B501
Manufacturer:
No Characteristics
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF15_Enviramid® N2315HL BK
Manufacturer:
Pellets, Black
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Pellets, Black
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF15 EPLON 6 GFR 15 NC Q1B501
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF15_Enviramid® N2315HL BK
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF15_ECONAMID FL 6G15H1UV1 500
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF15_ECOMID® B GF15 BK 90051
Manufacturer:
Black
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Black
Recorded properties are for screening; verify source data and conditions.
Total 47468 materials | Scroll down for more