HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (47468 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA 605-A
Manufacturer:
No Characteristics
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-MED(Al)
Manufacturer:
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-MD20
Manufacturer:
Flame retardant
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-MD20
Manufacturer:
No Characteristics
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-I VESTAMID® L-R3-MHI BK
Manufacturer:
Evonik Operations GmbH
Plasticized, impact resistance, antistatic, fast and even form filling, good impact resistance at low temperatures, light stabilized, heat stabilized
Physical Properties
Density
0.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Plasticized, impact resistance, antistatic, fast and even form filling, good impact resistance at low temperatures, light stabilized, heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GX
Manufacturer:
Additive Manufacturing
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Additive Manufacturing
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-I VESTAMID® L-R3-MHI BK
Manufacturer:
Increased electrical conductivity, Anti-static, High impact or impact modified, Light stabilized or stable to light, Heat stabilized or stable to heat
Physical Properties
Density
0.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Anti-static, High impact or impact modified, Light stabilized or stable to light, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF LATAMID 12 H2 G30
Manufacturer:
No Characteristics
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GX
Manufacturer:
No Characteristics
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF65
Manufacturer:
EMS-GRIVORY
High impact or impact modified, Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.7
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF_LATAMID 12 G50
Manufacturer:
No Characteristics
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF65_Grilamid LV-65H SST black 9288
Manufacturer:
EMS-GRIVORY
Improved impact resistance, Improved heat resistance, Improved UV resistance (outdoor use)
Physical Properties
Density
1.7
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved impact resistance, Improved heat resistance, Improved UV resistance (outdoor use)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF65
Manufacturer:
No Characteristics
Physical Properties
Density
1.66
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF DAIAMID® ZE7200
Manufacturer:
No Characteristics
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF65
Manufacturer:
EMS-GRIVORY
High impact resistance, Improved heat resistance, Improved UV resistance
Physical Properties
Density
1.7
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact resistance, Improved heat resistance, Improved UV resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF DAIAMID® A6658
Manufacturer:
No Characteristics
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF DAIAMID® A6658
Manufacturer:
Daicel-Evonik Ltd.
No Characteristics
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF65
Manufacturer:
EMS-GRIVORY
Hydrolysis resistant, Improved impact resistance, Improved heat resistance, Improved UV resistance (outdoor use)
Physical Properties
Density
1.65
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolysis resistant, Improved impact resistance, Improved heat resistance, Improved UV resistance (outdoor use)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF65
Manufacturer:
Injection Molding
Physical Properties
Density
1.66
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF50
Manufacturer:
Evonik Operations GmbH
Medium-viscosity, heat-stabilized, glass fiber-reinforced
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medium-viscosity, heat-stabilized, glass fiber-reinforced
Recorded properties are for screening; verify source data and conditions.
Total 47468 materials | Scroll down for more