HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (47468 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA12 GF30 H LB
Manufacturer:
Badamid
Laser Markable, Thermal Stability
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Laser Markable, Thermal Stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF20
Manufacturer:
EMS-GRIVORY
Hydrolysis resistant, Improved heat resistance
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolysis resistant, Improved heat resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF20
Manufacturer:
EMS-GRIVORY
Hydrolysis resistant, Improved impact resistance, Improved heat resistance, Anti-static, Improved UV resistance (outdoor use)
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolysis resistant, Improved impact resistance, Improved heat resistance, Anti-static, Improved UV resistance (outdoor use)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF20
Manufacturer:
EMS-GRIVORY
Hydrolysis resistant, Improved impact resistance, Improved heat resistance, Improved UV resistance (outdoor use)
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolysis resistant, Improved impact resistance, Improved heat resistance, Improved UV resistance (outdoor use)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF20_Grilamid LV-2A NZ black 9205
Manufacturer:
EMS-GRIVORY
Hydrolysis resistant, Improved impact resistance, Improved heat resistance, Improved UV resistance (outdoor use)
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolysis resistant, Improved impact resistance, Improved heat resistance, Improved UV resistance (outdoor use)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF20
Manufacturer:
EMS-GRIVORY
High impact or impact modified, Light stabilized or stable to light, Heat stabilized or stable to heat
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Light stabilized or stable to light, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF23
Manufacturer:
EMS-GRIVORY
Hydrolysis resistant, Improved impact resistance, Improved heat resistance, Improved UV resistance (outdoor use)
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolysis resistant, Improved impact resistance, Improved heat resistance, Improved UV resistance (outdoor use)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF20
Manufacturer:
EMS-GRIVORY
Hydrolysis resistant, Improved impact resistance, Improved heat resistance, Anti-static, Improved UV resistance (outdoor use)
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolysis resistant, Improved impact resistance, Improved heat resistance, Anti-static, Improved UV resistance (outdoor use)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF20_Grilamid LV-2H black 9288
Manufacturer:
EMS-GRIVORY
High impact or impact modified, Light stabilized or stable to light, Heat stabilized or stable to heat
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Light stabilized or stable to light, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF20
Manufacturer:
Injection Molding
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF20_Grilamid LV-2A NZ black 9205
Manufacturer:
EMS-GRIVORY
Hydrolysis resistant, Improved impact resistance, Improved heat resistance, Improved UV resistance (outdoor use)
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolysis resistant, Improved impact resistance, Improved heat resistance, Improved UV resistance (outdoor use)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF10
Manufacturer:
RTP
Flame retardant, U.V. stabilized or stable to weather
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF10 RTP 201 H
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF10 RTP 201 H FR
Manufacturer:
Flame retardant, High impact or impact modified
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF10 RTP 201
Manufacturer:
No Characteristics
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF15
Manufacturer:
Evonik Operations GmbH
heat stabilized
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF10 RTP 201 H
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF15
Manufacturer:
EMS-GRIVORY
Hydrolysis resistant, Improved impact resistance, Improved heat resistance
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolysis resistant, Improved impact resistance, Improved heat resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF10 RTP 201 MS 2 HB
Manufacturer:
No Characteristics
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GF10 RTP 201 F
Manufacturer:
Injection Molding
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Total 47468 materials | Scroll down for more