HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (47468 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA12-GB30
Manufacturer:
EMS-GRIVORY
Hydrolysis resistant, Improved friction & wear properties, Improved heat resistance
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolysis resistant, Improved friction & wear properties, Improved heat resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GB10
Manufacturer:
EMS-GRIVORY
Injection Molding
Physical Properties
Density
0.91
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12 CF5
Manufacturer:
Badamid
Anti-static
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Anti-static
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA 603-CF / PA12-CF
Manufacturer:
No Characteristics
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-CF50
Manufacturer:
No Characteristics
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-GB30
Manufacturer:
EMS-GRIVORY
Improved heat resistance, Improved UV resistance (outdoor use)
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved heat resistance, Improved UV resistance (outdoor use)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-CF45 20641
Manufacturer:
high chemical resistance, low water absorption, steady mechanical properties over a wide temperature range
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high chemical resistance, low water absorption, steady mechanical properties over a wide temperature range
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-CF30
Manufacturer:
EMS-GRIVORY
Improved impact resistance, Improved heat resistance, Anti-static, Improved UV resistance (outdoor use)
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved impact resistance, Improved heat resistance, Anti-static, Improved UV resistance (outdoor use)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-CF40
Manufacturer:
No Characteristics
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-CF30
Manufacturer:
EMS-GRIVORY
Improved impact resistance, Improved heat resistance, Anti-static, Improved UV resistance (outdoor use)
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved impact resistance, Improved heat resistance, Anti-static, Improved UV resistance (outdoor use)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-CF30
Manufacturer:
Injection Molding
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-CF30_XECARB® 21-C30-AE
Manufacturer:
XECARB® 21-C30-AE
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
XECARB® 21-C30-AE
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12 CF30
Manufacturer:
Badamid
Increased electrical conductivity
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12 CF30
Manufacturer:
Increased electrical conductivity
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-CF20
Manufacturer:
No Characteristics
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-CF20
Manufacturer:
HITHOR D
Injection Molding
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-CF15
Manufacturer:
EMS-GRIVORY
Improved impact resistance, Improved heat resistance, Anti-static, Improved UV resistance (outdoor use)
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved impact resistance, Improved heat resistance, Anti-static, Improved UV resistance (outdoor use)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-CF15_Rilsamid® ASR 13
Manufacturer:
ARKEMA
Increased electrical conductivity, Anti-static, Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Anti-static, Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12-CD+GF_LATILUB 82-05GR G30
Manufacturer:
Injection Molding
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA12 CF20/GF10 S3
Manufacturer:
Badamid
Increased electrical conductivity, U.V. stabilized or stable to weather
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Total 47468 materials | Scroll down for more