HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (1275 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound LF006E
Manufacturer:
LNP™
Easy Molding
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2205 LF
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2205 HF SE
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound LF006EX1
Manufacturer:
LNP™
Low warpage, Easy Molding
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low warpage, Easy Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LF006EX1
Manufacturer:
Low warpage, Easy Molding
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low warpage, Easy Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LF006E
Manufacturer:
LNP THERMOCOMP™
Easy Molding
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LF006
Manufacturer:
Injection Molding
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound LF006
Manufacturer:
LNP
Injection Molding
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LF006
Manufacturer:
Injection Molding
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound LF006E
Manufacturer:
LNP™
Easy Molding
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LF006E
Manufacturer:
LNP™ THERMOCOMP™
Easy Molding
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KT-880 GF30 BG 20
Manufacturer:
Flame retardant, U.V. stabilized or stable to weather, Heat Applications stabilized or stable to heat, Sterilizable, Ethylene Oxide (EtO) Chemical Process, Electrical and Electronical, Medical Sterilization, Steam sterilization, Gamma irradiation sterilization, Electron beam (e-beam) sterilization
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, U.V. stabilized or stable to weather, Heat Applications stabilized or stable to heat, Sterilizable, Ethylene Oxide (EtO) Chemical Process, Electrical and Electronical, Medical Sterilization, Steam sterilization, Gamma irradiation sterilization, Electron beam (e-beam) sterilization
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KT-880 GF30 BK 95
Manufacturer:
Flame retardant, U.V. stabilized or stable to weather, Heat Applications stabilized or stable to heat, Sterilizable, Ethylene Oxide (EtO) Chemical Process, Electrical and Electronical, Medical Sterilization, Steam sterilization, Gamma irradiation sterilization, Electron beam (e-beam) sterilization
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, U.V. stabilized or stable to weather, Heat Applications stabilized or stable to heat, Sterilizable, Ethylene Oxide (EtO) Chemical Process, Electrical and Electronical, Medical Sterilization, Steam sterilization, Gamma irradiation sterilization, Electron beam (e-beam) sterilization
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KT-820 GF30 BK95
Manufacturer:
Flame retardant, Heat stabilized or stable to heat, Sterilizable
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat, Sterilizable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PK-30GF/000 EM BK
Manufacturer:
No Characteristics
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HT® PEEK 3111 GF30
Manufacturer:
Badatech
Injection Molding
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KT-820 GF30 BG20
Manufacturer:
Flame retardant, Heat stabilized or stable to heat, Sterilizable
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat, Sterilizable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound LF006
Manufacturer:
LNP™
No Characteristics
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PK-30GF/000 NC
Manufacturer:
Edgetek™
No Characteristics
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PK-30GF/000 EM
Manufacturer:
Heat stabilized
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Total 1275 materials | Scroll down for more