HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (1275 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
Edgetek™ PK-30GF/000 FCR BK
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LF004EX1
Manufacturer:
LNP THERMOCOMP™
Easy Molding and Low Warpage
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding and Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
770GL30
Manufacturer:
ZYPEEK
Creep Resistance, Tribologic Grade
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Creep Resistance, Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2203 LF
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ THERMOCOMP™ Compound LF004E
Manufacturer:
Easy Molding
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2203 HF
Manufacturer:
Injection Molding
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KT-880 GF20
Manufacturer:
High impact or impact modified, Heat stabilized or stable to heat, Sterilizable
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat, Sterilizable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound LF004EX1
Manufacturer:
LNP
No Characteristics
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LF004E
Manufacturer:
No Characteristics
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LF004E
Manufacturer:
LNP™ THERMOCOMP™
No Characteristics
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2204 HF
Manufacturer:
Injection Molding
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LF004E
Manufacturer:
LNP™ THERMOCOMP™
Easy Molding
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LF004E
Manufacturer:
LNP™ THERMOCOMP™
Easy Molding
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HT® PEEK 1110 GF20
Manufacturer:
Thermal Stability
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Thermal Stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LARPEEK 10 GCE/600
Manufacturer:
Low Smoke, Chemical Resistance, General Chemical Resistance
Physical Properties
Density
1.93
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Smoke, Chemical Resistance, General Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound LFW55EX1
Manufacturer:
LNP™
Easy Molding, Dimensional Stability
Physical Properties
Density
1.81
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding, Dimensional Stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LF002EXD-WT02005
Manufacturer:
LNP™ THERMOCOMP™
Custom Color, Easy Molding
Physical Properties
Density
1.86
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Custom Color, Easy Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LF002EXD-WT02005
Manufacturer:
LNP™ THERMOCOMP™
Custom Color, Easy Molding
Physical Properties
Density
1.86
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Custom Color, Easy Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KT-880 GF15
Manufacturer:
Flame retardant, High impact or impact modified, Heat stabilized or stable to heat, Sterilizable, Steam sterilization, Chemical Process, Electrical and Electronical, Medical Gamma irradiation sterilization, Electron beam (e-beam) sterilization
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, High impact or impact modified, Heat stabilized or stable to heat, Sterilizable, Steam sterilization, Chemical Process, Electrical and Electronical, Medical Gamma irradiation sterilization, Electron beam (e-beam) sterilization
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KT-820 GF13 BG20
Manufacturer:
KetaSpire®
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Total 1275 materials | Scroll down for more