HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (47468 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA6-MX30 4MID 9B21030 FR1
Manufacturer:
Flame retardant
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MX30 A3 M 30 1 black
Manufacturer:
Low Warpage
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MX25 25D01 K04 R01
Manufacturer:
Tisan Engineering Plastics Co.Ltd.
High impact or impact modified
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MX23 GLAMIDE® T-422V0 R
Manufacturer:
Flame retardant, Halogen-free
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MX25 LyondellBasell Industries
Manufacturer:
flame-retardant
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flame-retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MX25 25D01 K04 R01
Manufacturer:
Tisan Engineering Plastics Co.Ltd.
High impact or impact modified
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MX25 Taromid B 280 MT5
Manufacturer:
Release agent, Low Odor
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Release agent, Low Odor
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MX20_N6C2
Manufacturer:
No Characteristics
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MX20 Celanese
Manufacturer:
General purpose grade, good surface quality and low warpage
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General purpose grade, good surface quality and low warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MX20 RAVAMID® ECO B MGF 20 GR
Manufacturer:
No Characteristics
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MX20 Celanese
Manufacturer:
General purpose grade, good surface quality and low warpage
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General purpose grade, good surface quality and low warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MX15_Armamid® PA6 MF 15-1
Manufacturer:
High mechanical and electrical properties; resilient to hydrocarbons, mineral and synthetic oils, strong and weak alkali, weak acids
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High mechanical and electrical properties; resilient to hydrocarbons, mineral and synthetic oils, strong and weak alkali, weak acids
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MX10 Taromid B 240 MT2 Y2
Manufacturer:
Flame retardant
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 MF 15-1
Manufacturer:
High mechanical and electrical properties, resilient to hydrocarbons, mineral and synthetic oils, strong and weak alkali, weak acids
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High mechanical and electrical properties, resilient to hydrocarbons, mineral and synthetic oils, strong and weak alkali, weak acids
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MX10 N6CV1
Manufacturer:
Flame retardant
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 MF 15-2
Manufacturer:
Armamid
Good Adhesion, Scratch Resistant, Thermal Stability
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Scratch Resistant, Thermal Stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MX10 N6C1
Manufacturer:
No Characteristics
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MX+GF40_AKROMID® B3 GFM 1525 black 1312
Manufacturer:
Injection Molding
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 MR20GF10 HS2 BK0304 03030
Manufacturer:
High impact or impact modified, Heat stabilized or stable to North America, Europe, Asia Pacific
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to North America, Europe, Asia Pacific
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MX+GF30_AKROMID® B3 GFM 10/20 natural (3692)
Manufacturer:
Injection Molding, Automotive
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Automotive
Recorded properties are for screening; verify source data and conditions.
Total 47468 materials | Scroll down for more