HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2203 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DX07408
Manufacturer:
LNP™
Flame Retardant
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DF008ER
Manufacturer:
LNP™
Easy Molding, Mold Release
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding, Mold Release
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound D452
Manufacturer:
LNP™
High Modulus, Low Warpage, Good Ductility
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
D451RC
Manufacturer:
LNP™ THERMOCOMP™
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant, Post-Consumer Recycling (PCR) Polycarbonate content up to 35%
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant, Post-Consumer Recycling (PCR) Polycarbonate content up to 35%
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
D451RC
Manufacturer:
LNP™ THERMOCOMP™
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant, Post-Consumer Recycling (PCR) Polycarbonate content up to 35%
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant, Post-Consumer Recycling (PCR) Polycarbonate content up to 35%
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
D451
Manufacturer:
LNP™ THERMOCOMP™
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound D451
Manufacturer:
High Modulus, Low Warpage, Good Ductility
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LGK4030
Manufacturer:
LEXAN™
Dimensional Stability, Flame Retardant
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Dimensional Stability, Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Iupilon GSH2040R2
Manufacturer:
No Characteristics
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LGK4010
Manufacturer:
LEXAN™
Dimensional Stability and Flame Retardant
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Dimensional Stability and Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC-GF35 Makrolon® 8345_AG
Manufacturer:
high viscosity, easy release, opaque
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high viscosity, easy release, opaque
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XANTAR™ G6F 23 UR
Manufacturer:
Flame Retardant, Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame Retardant, Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XANTAR™ SF 2230
Manufacturer:
Flame retardant
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SCANTEC PC S60R GF30
Manufacturer:
Injection Molding
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC-GF30 FR
Manufacturer:
Flame Retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame Retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® M830 GF
Manufacturer:
biocompatible according to many ISO 10993-1 test requirements, suitable for medical devices
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
biocompatible according to many ISO 10993-1 test requirements, suitable for medical devices
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® M430 GF
Manufacturer:
biocompatible according to many ISO 10993-1 test requirements, suitable for medical devices
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
biocompatible according to many ISO 10993-1 test requirements, suitable for medical devices
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DX13354
Manufacturer:
LNP™
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Impact, Good Surface Aesthetics and Wide Processing Window
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Impact, Good Surface Aesthetics and Wide Processing Window
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DX06313
Manufacturer:
LNP
Impact Modified, Thin-Wall Molding
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Impact Modified, Thin-Wall Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DX10311X
Manufacturer:
LNP™
High Modulus and Good Ductility
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus and Good Ductility
Recorded properties are for screening; verify source data and conditions.
Total 2203 materials | Scroll down for more