HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2740 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
NH4030B
Manufacturer:
Flame retardant
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NH5020
Manufacturer:
NORYL™
high heat resistance, thin-wall FR performance, good balance of affordable high heat, flow, hydrolytic stability, excellent creep resistance, dimensional stability
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high heat resistance, thin-wall FR performance, good balance of affordable high heat, flow, hydrolytic stability, excellent creep resistance, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NH4050
Manufacturer:
Non-brominated, Non-chlorinated, Flame Retardant, Battery Acid Resistance, Hydrolytic Stability, High Impact, Heat Resistance, Low Specific Gravity
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-brominated, Non-chlorinated, Flame Retardant, Battery Acid Resistance, Hydrolytic Stability, High Impact, Heat Resistance, Low Specific Gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N300X
Manufacturer:
NORYL™
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N850
Manufacturer:
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N225X
Manufacturer:
No Characteristics
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N300X
Manufacturer:
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS), non-brominated, non-chlorinated flame retardant, strong electrical performance, low moisture absorption, dimensional stability, hydrolytical stability
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS), non-brominated, non-chlorinated flame retardant, strong electrical performance, low moisture absorption, dimensional stability, hydrolytical stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N850
Manufacturer:
NORYL™
high impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N850
Manufacturer:
NORYL™
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N225X
Manufacturer:
No Characteristics
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N300X
Manufacturer:
Electrical performance, Low moisture absorption, Dimensional stability, Hydrolytical stability
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrical performance, Low moisture absorption, Dimensional stability, Hydrolytical stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NH4030B
Manufacturer:
NORYL™
high flow, injection moldable and extrusion grade, non-brominated, non-chlorinated flame retardant, low specific gravity
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, injection moldable and extrusion grade, non-brominated, non-chlorinated flame retardant, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N850
Manufacturer:
NORYL™
high impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N850
Manufacturer:
NORYL™
high impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N6850
Manufacturer:
NORYL™
Amorphous, Blending Resin, Creep Resistance
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Amorphous, Blending Resin, Creep Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NH4030B
Manufacturer:
Flame retardant
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N300X
Manufacturer:
Electrical performance, Low moisture absorption, Dimensional stability, Hydrolytical stability
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrical performance, Low moisture absorption, Dimensional stability, Hydrolytical stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N6850
Manufacturer:
NORYL™
Amorphous, Blending Resin, Creep Resistance
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Amorphous, Blending Resin, Creep Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N802
Manufacturer:
high flow, good dimensional stability, low specific gravity
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, good dimensional stability, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N802
Manufacturer:
high flow, good dimensional stability, low specific gravity
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, good dimensional stability, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Total 2740 materials | Scroll down for more